Dynabeads™ Protein G Immunoprecipitation Kit
Dynabeads™ Protein G Immunoprecipitation Kit
Invitrogen™

Dynabeads™ Protein G Immunoprecipitation Kit

Dynabeads Protein G Immunoprecipitation Kit is intended for immunoprecipitation (IP) and includes all reagents and buffers required to perform IP了解更多信息
Have Questions?
货号 10007D
价格(CNY)/ 40 reactions
价格5,312.00
飞享价3,453.00仅限网单直购,无需促销代码
(ends 31-Dec-2024)
您的价格
-
添加至购物车
价格(CNY)/ 40 reactions
飞享价3,453.00仅限网单直购,无需促销代码
(ends 31-Dec-2024)
添加至购物车
Dynabeads™ Protein G Immunoprecipitation Kit
货号10007D
价格(CNY)/ 40 reactions
飞享价3,453.00仅限网单直购,无需促销代码
(ends 31-Dec-2024)
-
添加至购物车

Dynabeads Protein G Immunoprecipitation Kit is intended for immunoprecipitation (IP) and includes all reagents and buffers required to perform IP using your own antibody. The kit is optimized for standard IP, but can also be used for Co-IP, chromatin IP (ChIP), or RNA IP (RIP). The kit includes the widely used Dynabeads Protein G magnetic beads with recombinant Protein G (∼17 kDa) covalently coupled to the bead surface. Both manual and automated protocols are available.

Benefits of Dynabeads Protein G Immunoprecipitation Kit include:
Fast and easy—IP in less than 40 minutes with no columns, centrifugations, or time-consuming pre-clearing required
High performance—high target protein yield with low antibody consumption
Low background—very low non-specific binding with a high signal-to-noise ratio
High reproducibility—uniform beads and optimized buffers help ensure consistent results
Automation ready—automation protocols available with the KingFisher Sample Purification instruments

Gentle separation causes minimal physical stress to proteins
The magnetic separation technology utilized by Dynabeads Protein G beads is rapid and gentle, causing minimal physical stress to target proteins. This permits the isolation and concentration of labile composites that might otherwise dissociate or be damaged by proteases during long incubation times. Native protein conformation and large protein complexes are preserved.
 
Binding strength and antibody binding capacity
Dynabeads Protein G beads allow for the isolation of most mammalian immunoglobulins (Ig). The amount of Ig captured depends on the concentration of Ig in the starting sample and on the type and source of the Ig. 100 μL of Dynabeads Protein G will isolate approximately 25–30 μg human IgG from a sample containing 20–200 μg IgG/mL. Predominantly Fc-binding allows optimal Ig orientation.

Dynabeads magnetic beads are not porous in nature such as Sepharose or agarose resins. This means that all antibodies bind to the smooth outer surface of the beads and are thus available to bind to the target protein. This translates to a low antibody consumption while obtaining a high yield of the target protein. The smooth bead surface is also the reason for the low non-specific binding that Dynabeads magnetic beads are known for.

Dynabeads immunoprecipitation protocol is fast and easy
The manual IP protocol is simple and can be performed in less than 40 minutes with 3 easy bind-incubate-elute steps. The procedure does not require any pre-clearing due to the low non-specific binding and uses very little antibody while still obtaining a high IP yield, thus saving both time and cost per IP.

The antibody-coated beads can be used in a variety of IP applications such as Co-IP, chromatin IP (ChIP/ChIP sequencing), RNA IP (RIP, RIP sequencing), small-scale IgG purification, and protein purification. The isolated pure target protein can be used in downstream western blot, mass spectrometry analysis, sequencing, etc.

Automation-ready for use with KingFisher purification systems
The 2.8-μm magnetic beads are ideal for high-throughput enrichment. This process can be automated using any of our KingFisher sample purification systems

Commercial supply 
Our manufacturing sites are ISO 13485-certified. Bead characteristics and manufacturing conditions help ensure consistency and batch reproducibility making them an ideal choice for commercial supply. If you are in the process of customizing Dynabeads Protein G Immunoprecipitation Kit in a commercial product or service or need a larger bulk volume of this product, please contact us at oemdynal@lifetech.com or see our Dynabeads OEM page.

Learn more about Dynabeads magnetic beads and KingFisher Sample Purification Systems:
Dynabeads Protein G magnetic beads are also available separately, without the buffers
See our immunoprecipitation selection table, data, and references
Dynabeads magnetic beads selection guide
See magnets for Dynabeads magnetic beads separations
KingFisher automation protocols
Watch a video about the KingFisher Flex instrument

*Sepharose is a trademark of GE Healthcare Bio-Sciences AB.

仅供科研使用。不可用于诊断程序。
规格
认证/合规ISO9001 和 ISO13485
浓度30 mg/mL
颜色Brown
适用于(应用)Co-immunoprecipitation
材质磁性聚苯乙烯
产品类型IP Kit
产品规格Kit
适用于(设备)KingFisher™ Sample Purification System, DynaMag™ magnets
高通量能力兼容高通量应用
分离技术磁珠
配基类型蛋白 G
测试数量40 Tests
产品线Dynabeads™
样品类型Cell Cultures, Clinical Sample, Supernatants, Tissue Digests, Cell Extracts, Serum
有效期24个月
运输条件室温
规格分布CV <5%
容积(公制)2 mL
直径(公制)2.8 μm
调控状态For Research Use Only
Unit Size40 reactions
内容与储存
• 2 mL Dynabeads Protein G
• 16 mL Antibody (Ab) Washing and Binding buffer
• 28 mL Washing Buffer
• 1 mL Elution Buffer

Store at 2°C to 8°C.