Search Thermo Fisher Scientific
可高温高压灭菌 | Autoclavable |
容积(英制) | 2.5加仑 |
容量(公制) | 10 L |
盖子材料 | Polypropylene |
盖子尺寸 | 83B |
颜色 | Clear |
描述 | 无轴颈 |
外径直径(公制) | 253 mm |
适用于(应用) | Media/Buffer Preparation , Media/Buffer Storage, Sampling, Storage, Transportation |
带盖高度(公制) | 294 mm |
材质 | Polycarbonate |
每箱数量 | 4/Cs. |
每架数量 | 1 Ea. |
产品类型 | Carboy |
无菌 | Non-sterile |
最大容量(英制) | 3.3 gal. |
最大容积(公制) | 12.5 L |
Unit Size | Each |
可高温高压灭菌 | Autoclavable |
容积(英制) | 2.5加仑 |
容量(公制) | 10 L |
盖子材料 | Polypropylene |
盖子尺寸 | 83B |
颜色 | Clear |
描述 | 无轴颈 |
外径直径(公制) | 253 mm |
适用于(应用) | Media/Buffer Preparation , Media/Buffer Storage, Sampling, Storage, Transportation |
带盖高度(公制) | 294 mm |
材质 | Polycarbonate |
每箱数量 | 4/Cs. |
每架数量 | 1 Ea. |
产品类型 | Carboy |
无菌 | Non-sterile |
最大容量(英制) | 3.3 gal. |
最大容积(公制) | 12.5 L |
Unit Size | Case of 4 |
可高温高压灭菌 | Autoclavable |
容积(英制) | 5加仑 |
容量(公制) | 20 L |
盖子材料 | Polypropylene |
盖子尺寸 | 83B |
颜色 | Clear |
描述 | 无轴颈 |
外径直径(公制) | 287 mm |
适用于(应用) | Media/Buffer Preparation , Media/Buffer Storage, Sampling, Storage, Transportation |
带盖高度(公制) | 536 mm |
材质 | Polycarbonate |
每箱数量 | 4/Cs. |
每架数量 | 1 Ea. |
产品类型 | Carboy |
无菌 | Non-sterile |
最大容量(英制) | 5.5加仑 |
最大容积(公制) | 22.5 L |
Unit Size | Case of 4 |
可高温高压灭菌 | Autoclavable |
容积(英制) | 5加仑 |
容量(公制) | 20 L |
盖子材料 | Polypropylene |
盖子尺寸 | 83B |
颜色 | Clear |
描述 | 无轴颈 |
外径直径(公制) | 287 mm |
适用于(应用) | Media/Buffer Preparation , Media/Buffer Storage, Sampling, Storage, Transportation |
带盖高度(公制) | 536 mm |
材质 | Polycarbonate |
每箱数量 | 4/Cs. |
每架数量 | 1 Ea. |
产品类型 | Carboy |
无菌 | Non-sterile |
最大容量(英制) | 5.5加仑 |
最大容积(公制) | 22.5 L |
Unit Size | Each |
货号 | 规格 | 单位规格 | 容量(公制) | 价格(CNY) | 库存状况 | 数量 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
2251-0020PK | Each | 10 L | 价格 2,007.00 您的价格 | - | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
2251-0020 | Case of 4 | 10 L | 价格 7,571.00 您的价格 | - | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
2251-0050 | Case of 4 | 20 L | 价格 11,286.00 您的价格 | - | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
2251-0050PK | Each | 20 L | 价格 2,990.00 您的价格 | - | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
包括:
订购信息:
其他瓶盖选件包括 Nalgene 快速灌装/排气盖(货号 2158),Nalgene 灌装/排气盖(货号 2162)Nalgene Top Works™ 液体转移系统(货号 2135)和 Nalgene 校验瓶(货号 DS2127)。其他配件包括 Nalgene 倒钩装头配件(货号 6149)。
备注:
高压灭菌前,完全拧开螺纹瓶盖并卸下龙头。
† 术语“防漏”适用于符合以下标准的 Thermo Scientific Nalgene 产品:a) 对于盖尺寸小于 100 mm 的瓶/烧瓶/漏斗密封系统,当注满水后,在 2 psig 的气体压力下,倒置 2 分钟,内部的水不会溢出;b) 对于盖尺寸大于 100 mm 的瓶/漏斗/烧瓶密封系统,当注满水后,将其倒置 15 分钟,内部的水不会溢出。注意:如果使用其他液体进行以上测试,可能会得出不同的结果。为确保使用安全,建议客户在计划的应用条件下测试 Thermo Scientific Nalgene 瓶和盖。Thermo Scientific Nalgene 产品和 Nalgene 密封盖一起使用时,常温常压下防漏。
† The term leakproof applies to Thermo Scientific Nalgene products that meet the following criteria: a) Bottle/flask/funnel closure systems with closures smaller than 100 mm, after they are filled with water, inverted, withstand air pressure of 2 psig for 2 minutes, and no water escapes. b) Bottle/funnel/flask closure systems of larger than 100 mm after they are filled with water, inverted for 15 minutes, and no water escapes. Note: these tests, using other liquids, may not yield the same results. To ensure safe usage, customers are advised to test Thermo Scientific Nalgene bottles and closures under conditions of their planned applications. Thermo Scientific Nalgene products are leakproof at ambient temperature and pressure when used with their Nalgene closures.